please select HUIYUE transformer bushing auto through machine manufacturer.

Domestic initiative Dongguan Hui Yue Technology HY-R20 automatic machine two 0.1mm copper casing wear while wearing 28L Tiefo sleeve, and today I work in the company, Mr Tang workshop debugging a casing machine for two 0.1mm copper line while wearing 28L Tiefo sleeve, because two very thin 0.1mm copper and very soft, artificial wear tube is very difficult thing, our unconventional casing machine technology, the sleeve can be ways to commissioning single or double root wear sleeve length can be arbitrarily set, you can set up a single or double root 90mm length, its casing effect see the figure, due to a high-definition video capture, the company provides can not be uploaded to the Internet, such as need to look at its HY-R20 automatic machine casing wear two 0.1mm copper casing operation of the video, please contact the online customer or online QQ892653635.

 

 

Automatic wear bushing machine physical map

Automatic machine casing wear color

Kun Yang Electronics Co., Ltd. in Guangzhou in 1997 to set up factories in mainland China, is a professional mobile phone (cell phone) of the peripheral parts of the product development, production and sales of Taiwan-funded enterprises. Companies with high-frequency transformer RM6 products. Do 0.1mm single copper casing wear sleeve 30L, before all the workers to manually go through the casing machine, line is too thin, 30L Tiefo casing is too small, is a very difficult thing, but also need to be very good eyesight can, through sales Yang Wenhua introduced, they do a RM6-frequency transformer winding and casing preamble step takes about one minute, and its efficiency has not raised up, follow the installation of our HY-R20 automatically wear bushing machine, make a product takes about 30 seconds, by electronic Mr.Huang Guangzhou Kun Yang summed up data, the installation of casing wear machine, which can greatly enhance the efficiency of 80% to 100% efficiency. Here are our photos at work Kun Yang electronic photographed.

Artificial wear bushing chart:

Automatic wear artificial casing machine diagram

Automatic installation of HY-R20 wear bushing machine diagram:

Single automatic wear bushing machine diagram

Today casing wear hand, manual trimming, wasted a lot of time, and the cost is very expensive, but now there is an automatic machine wear sleeves, you can solve a lot of problems in this respect, labor, cost, efficiency, etc., HY -R20 automatic wear bushing machine instead of doing so through pipes, save costs and improve efficiency through the tube more than doubled, high-frequency transformer manufacturers preferred products. But if you purchase some quality time off, but automatic wear bushing machine manufacturers, because the line is very thin, and very soft, it will send the line past the wear bushing in there knotted yarn feeding port, after a failure, and the need Automatic wear bushing machine re-commissioning and re-threading, which greatly affects the efficiency.

(Note: Our HY-R20 automatic wear bushing machine suitable for any brand of CNC routing machines, can be installed directly use, very convenient, you need to wear a tube the way we have done for you)

HY-R20 automatic wear bushing machine

Original from：http://www.cnhuiyue.com/news/news567.html

Source：HUITUE transformer bushing auto through machine Manufacturers